Micro-Joining Welding
Welding Design
Reliability Assessment on the Life Prediction
Nondestructive Assessment for Material Degradation
학술지 논문
(2018)
Assessing Corrosion Fatigue Characteristics of Dissimilar Material Weld between Alloy617 and 12Cr Steel Using Buttering Welding Technique.
METALS.
8,
10
(2018)
Welding residual stress effect of the fatigue strength at dissimilar material weld between Alloy617 and 12Cr steel.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B.
32,
19
(2018)
Welding Residual Stress Analysis and Fatigue Strength Assessment at Elevated Temperature for Multi-pass Dissimilar Material Weld Between Alloy 617 and P92 Steel.
METALS AND MATERIALS INTERNATIONAL.
24,
4
(2018)
Welding Residual Stress Analysis and Fatigue Strength Assessment of Multi-Pass Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel.
METALS.
8,
1
(2016)
An Assessment of the Mechanical Properties and Microstructural Analysis of Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel.
METALS.
6,
10
(2016)
Assessing mechanical properties of the dissimilar metal welding between P92 steels and alloy 617 at high temperature.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
30,
10
(2015)
SiO2와 Al2O3를 충진재료로 사용하는 초고압 GIS용 에폭시절연물 베리어의 전기적 및 기계적 특성에 관한 연구.
전기전자재료학회논문지.
28,
6
(2014)
Assessment of the crack growth characteristics at the low fatigue limit of a multi-pass welded Ni-based alloy 617.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
28,
(2014)
FATIGUE STRENGTH ASSESSMENT INCLUDING WELDING RESIDUAL STRESS OF SPOT WELDED JOINTS SUBJECTED TO CROSS-TENSION LOADS.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY.
15,
5
(2014)
Fracture Mechanical Assessment of the Corrosion Fatigue Characteristics at the Low Fatigue Limit of a Multi-pass Welded Ni-Based Alloy 617.
Procedia Material Science.
13,
1
(2013)
Joining STS304l sheets by using nano-adhesives.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
27,
7
(2012)
Development of a press-forming technology of the pressboard for a 154 kV transformer.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
26,
7
(2012)
TS형 박강판 용접 구조물의 자동화설계를 위한 피로특성에 관한 연구.
한국생산제조시스템학회지.
21,
2
(2011)
A Study on Joining Technology of Aluminum Alloy Sheets Using Nano-Adhesives.
INTERNATIONAL JOURNAL OF MODERN PHYSICS D.
25,
31
(2011)
잔류응력을 고려한 압연강 용접구조물의 X-ray 회절법에 의한 파괴역학적 고찰.
대한기계학회논문집 A.
35,
10
(2011)
An Assessment of the Mechanical Characteristics and Optimum Welding Condition of Ni-Based Super Alloy.
Procedia Engineering.
10,
1
(2011)
Nondestructive Assessment of Elbow Wall-thinning in a Pipe System.
Procedia Engineering.
10,
1
(2011)
Assessment of the Electrochemical Corrosion Properties and Environmentally Induced Cracking of an A106 Gr B Steel Pipe Weld in NaCl Solution Saturated with H2S Gas.
METALS AND MATERIALS INTERNATIONAL.
17,
2
(2011)
A Study on the Fatigue Life Prediction of the Various Gas-welded Joints Using a Probalistics Statics Technique.
METALS AND MATERIALS INTERNATIONAL.
17,
1
(2010)
Reliability Assessment and Prediction of a Fatigue Design Criterion for the Gas Welded Joint.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY.
23,
5
단행본
(2006)
설계자를 위한 최적화 해석 프로그램.
도서출판 골드.
단독
특허/프로그램
하중인가형 전기-화학적 부식 실험장치.
10-2009-0066805.
20111006.
대한민국
응력부식균열 시험장치.
10-0900881.
20090527.
대한민국
버스윈도우 필라 조인트의 구조.
0386010.
20030520.
대한민국
소형 유압레버식 응력부식균열 시험기.
0386011.
20030520.
대한민국
학술회의논문
(2017)
Residual Stress Analysis and Fatigue Strength Assessment of Multi-Pass Dissimilar Material Welded Joint between Alloy 617 and 12 Cr Steel.
ICMR2017 & QR2MSE2017.
중국
(2017)
Assessing Welding Residual Stress and Corrosion Fatigue Strength of Dissimilar Material Weld between Alloy617 and 12Cr steel.
AMDP.
인도
(2017)
Welding Residual Stress Analysis and Fatigue Strength Assessment at Elevated Temperature for Multi-Pass Dissimilar Material Weld between Alloy 617 and P92 steel.
AMDP.
인도
(2017)
Assessing Residual Stress and Mechanical Properties of the Dissimilar material Weld Between Alloy617 and 12Cr Steel.
IWJC.
대한민국
(2017)
Welding residual stress and strength of dissimilar material weld between Alloy617 and 9Cr-2W.
IWJC.
대한민국
(2016)
Assessing Mechanical Properties and Crack Grwoth Characteristics of the Dissimilar Material Weld between Ni-Based Alloy617 and 12Cr steel.
ACEM.
대한민국
(2016)
Assessment of Fracture Mechanical Characteristics of Dissimilar Material Welds between P92 steel and Alloy 617.
ACEM.
대한민국
(2016)
Assessing Mechanical Properties and electro-chemical corrosion characteristics of Dissimilar Material Weld between Alloy617 and 12Cr steel.
ISAMR.
대만
(2016)
Alloy617과 12Cr강 이종용접부의 잔류응력을 고려한 기계적 특성 평가.
대한기계학회 춘계학술대회.
대한민국
(2015)
Assessing Mechanical Properties of the Dissimilar Weld Between P92 and Alloy617 at High Temperature 700 Degree.
ICMR2015.
대한민국
(2015)
Assessing Mechanical Property and Corrosion Characteristics of the Dissimilar Material Weld Between Ni-Based Alloy 617 and 12Cr Steel.
ICMR2015.
대한민국
(2015)
Stress distribution analysis and tensile strength assessment of adhesive bonded CFRP joint.
ICMR2015.
대한민국
(2015)
9Cr-2W강과 Ni-Base Alloy 617의 이종용접부 미세조직 및 기계적 성질 평가.
대한기계학회 추계.
대한민국
(2015)
Alloy617과 12Cr강의 이종 용접과 기계적 특성 평가.
대한기계학회 추계.
대한민국
(2015)
Alloy617과 12Cr강의 이종 용접부의 잔류 응력을 포함한 기계적 특성 평가.
대한기계학회 춘계.
대한민국
(2015)
Ni-Base Alloy 617과 P92강 이종용접부의 미세조직 및 기계적 특성 평가.
대한기계학회 춘계.
대한민국
(2014)
Alloy617 용접부의 부식 및 부식피로균열성장 특성 평가.
대한기계학회 추계학술대회.
대한민국
(2014)
MWCNT복합 접착제를 이용한 단일 겹침 접합부의 응력분포해석 및 피로 강도 평가.
대한기계학회 추계학술대회.
대한민국
(2014)
Alloy 617 용접부의 피로설계 기준 예측과 신뢰성 평가.
대한기계학회 추게학술대회.
대한민국
